How To Make A Pot Holder With A Loom

Download Article

Download Article

Do you have piles of one-time t-shirts filling up your storage spaces? Turn them into gorgeous, colorful potholders instead! The DIY potholder process could not exist easier, and the end production will be a big help around the kitchen. We'll teach yous how to cut your t-shirt and and then walk y'all through how to fill your loom. To learn everything you need to know, read on!

Things You Should Know

• Cut your old t-shirt into ii in (5.one cm) broad, 6 in (15 cm) tall cloth loops (including a slit through the eye of the cloth).
• Hook the fabric loops onto 1 side of the loom so weave more loops through the existing loops from the other side of the loom (until you lot fill the entire loom).
• Close off your potholder past repeatedly sliding 1 fabric loop through the loop next to it, property onto the 2nd loop and letting the get-go loop tighten confronting the potholder.

1. one

   Cut off your jersey t-shirt'due south neckline, sleeves, and shirt hem. Most t-shirt types will work fine, but jersey cotton is your best bet. Grab a pair of scissors and remove the portions of your t-shirt that can't exist fabricated into loops—or, the neckline, sleeves, and shirt hem (found at the bottom of most shirts). Make sure to cut on the inside of the hem or seam, considering these portions shouldn't be made into loops. ^[one]

   • Neckline and hem textile is also thick to be cut into loops. The sleeves, on the other mitt, are likewise short in diameter to be cutting into loops.
   • Not all t-shirts have a shirt hem. Look at the lesser of your tee and if you don't see a hem, don't worry about cutting the bottom portion off.

2. 

   2

   Fold your t-shirt and cut it into strips that are 2 in (v.1 cm) thick. Showtime, fold your shirt hotdog style (or, lengthwise). Get the shirt every bit apartment as possible, lining upwardly the edges and using your hands to flatten out creases. Then, using scissors or a rotary cutter, piece the t-shirt into strips every 2 in (5.i cm). Cut from the side of the shirt and continue moving up as you work.^[2]

   • Use a ruler to measure your strips.
   • Don't worry about being super careful hither—do your best to cut straight and evenly, simply this project doesn't crave perfect work!
   • Count the hooks on 2 sides of your loom. This is the number of loops you lot'll need. If necessary, utilize a second shirt (and feel complimentary to grab a new colour/pattern to mix up your blueprint!)

   Advertising

3. 

   3

   Unfold your strips, pile them up, and cut off the folded ends. Afterwards cut your t-shirt into strips, you'll have a bunch of long loops of fabric. Starting time, unfold your loops so that they're totally flat and equally you do this, place them into a single pile. Adjacent, cutting off both ends of the t-shirt loops so that now you take a pile of long strips (instead of long loops of textile).^[3]

4. 

   4

   Cut 6–6.5 in (fifteen–17 cm) long strips and round off the edges. These strips tin can be any length you want depending on how taut y'all'd like your potholder to exist. 6–6.v in (15–17 cm) works well for 13-peg looms. And so, pick up each strip and cutting curved snips into each corner (this will remove the sharp edges and go out behind a rounded edge).^[4]

   • The exact size of your strips depends on how tight or loose y'all'd similar your potholder to be. For smaller looms, cut smaller lengths of fabric.
   • Once again, these don't need to be perfect cuts. Every bit long every bit you lot have strips that are similar in length and take rounded edges, you're expert to go!

5. 

   v

   Fold the strips and cut slits in their centers (but don't slice all the way through). Finally, your t-shirt is nearly gear up to get potholder loops! Take each strip and fold it in one-half, lengthwise. Starting from the creased end of the strip, cut through the heart of the strip. Don't cut all the way through—instead, leave near .5 in (i.3 cm) intact on the other finish of your folded strip.^[5]

   • When y'all unfold your cutting t-shirt strips, yous should have a half dozen–six.5 in (fifteen–17 cm) fabric loop with rounded edges.

Advertizement

1. 

   1

   Claw your fabric loops onto your loom. Working from merely one side of the loom, attach both ends of your loops to both hooks on either side of the loom. Be careful to keep your hooks and loops lined upwardly properly. If you're cutting multiple t-shirts to create a pattern, try alternating colors on your loom as well.^[six]

   • Make full the entire side of this loom with fabric loops.

2. 

   2

   Weave your loom hook through your fastened fabric loops. Once yous've completed one side of your loom, turn the loom xc degrees. Now, grip your loom hook and gently (without forcing the fastened loops off their hooks) weave your hook under your first loop pair and over the adjacent loop pair. Continue on in this way, weaving over and under each loop all the way across your loom.^[7]

   • Depending on the size of your loom and the size of your hook, your claw may not exist long enough to weave all the manner across. If this is the example for you, get-go weaving halfway across your loom instead of from the end.

3. 

   iii

   Utilize your hook to pull a textile loop through your loom. At present that your claw is weaved through your loom, attach one cease of your material loop to the nearby hook. Next, attach the other cease of your loop to the end of your loom hook. Finally, pull your hook (and the attached loop) through the loom. Continue doing this until you've filled the entire loom.^[8]

   • Considering yous've already weaved your hook through the fabric loops, as y'all pull your new loop through on your claw, it volition weave the new loop automatically.
   • Annotation that y'all tin can hands practise this with your fingers, though information technology may have more time. But fasten your loop to one terminate'south hook and, with fingers, guide the loop under and over each cloth loop. When you lot reach the other end with your material, spike the loop onto the loom'south claw.

4. 

   4

   Close off the potholder 1 loop at a fourth dimension. First, remove 1 loop from the corner of your loom and exist conscientious non to let go of it. Adjacent, while still holding onto your outset loop, remove the loop side by side to it as well. Pull your beginning loop over top of your second loop then let go of the first loop (simply go along holding onto the 2d loop).^[ix]

   • The offset loop will tighten onto the side of the potholder, effectively closing off and finishing that portion.
   • This can exist done with your easily, but it's much easier with a claw.

5. 

   5

   Leave 4 fastened loops on nearby hooks to hold the potholder in identify. Go along moving effectually the loom in this way, closing off the potholder as y'all work. In 4 places on your loom (for instance, halfway through each of the loom's sides), hook ane loop back onto the loom subsequently fastening it. This keeps the potholder taut while yous continue working to remove information technology.^[x]

6. 

   6

   Remove the entire potholder from the loom. To finish your potholder and remove it from your loom, close of every unmarried loop effectually every side of your potholder. Once yous're finished with this, life the potholder off of the final 4 loops, and then you'll be all ready to get. You've only fabricated a new potholder out of goose egg more than than some old t-shrits!^[11]

Ad

Ask a Question

200 characters left

Include your e-mail accost to go a message when this question is answered.

Submit

Advertisement

Thanks for submitting a tip for review!

About This Commodity

Cheers to all authors for creating a folio that has been read three,407 times.

If y'all buy through links on our site, we may earn a committee.

Did this article help you?

Source: https://www.wikihow.com/Make-Potholder-Loops-from-T-Shirts

Share this post